求DGPS3.0和EX-P的说明书，上次收藏了，被我弄丢了。。。
- 主题发起人 hsih119
- 发布时间
主题状态: 你好
, 这是一个创建于100 天前的主题，其中讨论的信息可能已经发生改变，在此主题内的提问通常需要等待更长的时间。
很简单的啊，没有什么注意事项：
Poorboys World White Diamond Show Glaze for Light Vehicles is a wipe on, wipe off product.
Spread the wax on with a soft, clean foam applicator. If applying by machine, set your polisher to a low speed and work until a shine begins to appear.
Allow it to dry to a haze and then buff off with a clean, soft Microfiber Towels.
本帖最后由 cszxc098 于 2014-9-5 11:49 编辑
After reading many online reviews, I decided to give this product a try on my black Porsche 996......
After wash and clay, the first application of this product covered about 65% of the swirls and scratches.....and gave deep glossy shine.....second application covered 90% of the swirls and scratches....
I used a finishing pad with a rotary.....
I followed with 2 coats of wax (make sure it is a pure wax or sealant, without cleaners in it).....
I am very happy with the results, way to go Poorboy's !!
一个黑洞用户的贴，有点意思，参考一下：
After reading many online reviews, I decided to give this product a try on my black Porsche 996......
After wash and clay, the first application of this product covered about 65% of the swirls and scratches.....and gave deep glossy shine.....second application covered 90% of the swirls and scratches....
I used a finishing pad with a rotary.....
I followed with 2 coats of wax (make sure it is a pure wax or sealant, without cleaners in it).....
I am very happy with the results, way to go Poorboy's !!
 4.gif "(5) 4 {:27:}")
 2.gif "(9) 2 {:73:}")
 2.gif "(11) 2 {:56:}")
After reading many online reviews, I decided to give this product a try on my black Porsche 996......
看了很多网上的贴，我决定给我的黑色保时捷996试试这款产品...
After wash and clay, the first application of this product covered about 65% of the swirls and scratches.....and gave deep glossy shine.....second application covered 90% of the swirls and scratches....
在洗车和跑粘土后，打第一次，大概掩盖了65%的螺旋纹和划痕，并给予深邃的闪亮，打第二次，掩盖了90%的螺旋纹和划痕（TW的玩家目测大概是50%左右的盖纹，很多也说上了和没上一样，白色车漆更难区别点）
I used a finishing pad with a rotary.....
I followed with 2 coats of wax (make sure it is a pure wax or sealant, without cleaners in it).....
随后我上了两层蜡（确定是纯蜡或者封体，不带研磨清洁成分的）......
I am very happy with the results, way to go Poorboy's !!
 1.gif "(15) 1 {:47:}")
.jpg "1 (6) {:277:}")
 2.gif "(1) 2 {:69:}")
 4.gif "(9) 4 {:75:}")
 4.gif "(4) 4 {:32:}")
 1.gif "(12) 1 {:55:}")
.jpg "1 (25) {:231:}")
.jpg "1 (14) {:272:}")
.jpg "1 (34) {:279:}")
好败家。。。不如好好入一罐915算了~~~
