rain-x施工完会跳刮，怎么搞定？
- 主题发起人 海盗船长
- 发布时间
主题状态: 你好
, 这是一个创建于100 天前的主题，其中讨论的信息可能已经发生改变，在此主题内的提问通常需要等待更长的时间。
 2.gif "(11) 2 {:56:}")
突然一下受惊了。。。  1.gif "(10) 1 {:60:}")
2.gif "(1)2 {:66:}")
 3.gif "(4) 3 {:33:}")
 1.gif "(12) 1 {:55:}")
 1.gif "(11) 1 {:57:}")
Product Usage Instructions
Clean and dry surfaces before treating
Apply in temperatures above 40 degrees F
Apply Rain‑X® to a small, folded, dry cloth
Wipe onto exterior glass using a firm, circular and overlapping motion
Allow product to dry; a slight haze may appear
Reapply Rain‑X® to ensure complete and uniform coverage
Remove final haze with a dry cloth or by sprinkling water onto the haze and wiping with a paper towel
还是要做两遍的，不过擦掉只要一遍
最终效果还是要看前期清洁是否彻底
Clean and dry surfaces before treating
Apply in temperatures above 40 degrees F
Apply Rain‑X® to a small, folded, dry cloth
Wipe onto exterior glass using a firm, circular and overlapping motion
Allow product to dry; a slight haze may appear
Reapply Rain‑X® to ensure complete and uniform coverage
Remove final haze with a dry cloth or by sprinkling water onto the haze and wiping with a paper towel
还是要做两遍的，不过擦掉只要一遍
最终效果还是要看前期清洁是否彻底
